Cisco Ccna Router On Stick

By switzerlandersing On Sep 13, 2025

Amplificador Wifi | Cisco Networking, Router, Routing And Switching

Amplificador Wifi | Cisco Networking, Router, Routing And Switching The following diagram shows the logical traffic flow of the router on a stick setup. it illustrates how devices in vlan 10 send traffic to the router through a single trunk link gi0/0 and how the router uses subinterfaces to route the traffic between the vlans. Depending on the model and cisco ios version, the commands available and the output produced might vary from what is shown in the labs. refer to the router interface summary table at the end of the lab for the correct interface identifiers.

Cisco CCNA Router On Stick

Cisco CCNA Router On Stick When pc 1.1.1.1 tries to ping pc 2.1.1.1, the router will try to resolve pc 2.1.1.1's mac address before forwarding any frame towards it. arp frames sent from the router, towards pc 2.1.1.1, will have a vlan 1 tag attached to it. the switch, however, will drop it because it expects un tagged frames for its native vlan, which is vlan 1 on its side. This lesson explains how to configure a router on a stick scenario with cisco ios devices. this lets you route traffic over a trunk. This tutorial explains router on stick and how it works on routers. learn how to configure a router as router on stick. A router on a stick (as illustrated below) adds a router to the switched environment to provide routing capability. this deployment model uses a single trunk link configured on the switch side and a subinterface per vlan configured on the router.

Cisco CCNA Router On Stick

Cisco CCNA Router On Stick This tutorial explains router on stick and how it works on routers. learn how to configure a router as router on stick. A router on a stick (as illustrated below) adds a router to the switched environment to provide routing capability. this deployment model uses a single trunk link configured on the switch side and a subinterface per vlan configured on the router. 📺 *in this video, i’ll show you how to configure router on a stick (inter vlan routing) using a cisco router and switch – step by step. this is a core concept for ccna and real world. In this lesson, we will focus on router on a stick, which allows a network administrator to route packets between multiple vlans using a single router interface divided into subinterfaces. Great information related to router on a stick. thanks for sharing.